Controllab

Projects

2015

2014

  • Bakker Sliedrecht: Classified
  • 2-B Energy: Classified
  • Jan de Nul: Classified
  • Ulstein: Classified
  • Hutchinson: Classified
  • Dynobend: Classified.
  • Norwegian Electric Systems AS: Classified
  • VolkerRail: Optimization of a control system for a canal lock
  • Mammoet: Specifications for a Training Simulator
  • MARIN: Classified
  • Croon Industrial Systems B.V.: Classified
  • Kwant Controls: Classified
  • Dynobend: Classified
  • High-Wind: Classified
  • Irmato: Implementing a model based design chain including code deployment.

2013

  • Huisman Equipment: Automatic Testing of PLC Code. For more information see the factheet.
  • Dynobend: Classified.
  • Gebr. Klöcker GmbH: Controllab created a dynamic model of the power electronics, stepper motor and load. For more information see the factheet.
  • Allseas Engineering: Acceleration of a pipe layer simulation. For more information see the factheet.
  • Mammoet: Classified.
  • Norwegian Electric Systems: Classified.
  • MECAL: Development of an active vibration isolation system for a machine support frame. For more information see the factheet.
  • ERC Machinery: Classified
  • Bakker Sliedrecht: Classified.
  • Benchmark Electronics: Classified.
  • Rolls-Royce Marine: HIL tester for a launch and recovery system. For more information see the factheet.
  • Kwant Controls: Classified.

2012

  • Lansmont: Supporting the design of an impact tester. For more information see the factheet.
  • BESI: Classified.
  • MECAL: Development of an active vibration isolation system for a machine support frame. For more information see the factheet.
  • Croon: Classified.
  • Kwant Controls: Classified
  • ERC Machinery: Classified
  • Aker: Development of a HIL tester for a drill string compensator. For more information see the factheet.
  • MARIN: Improving the performance of atowing tank. For more information see the factheet.
  • Verhaert: Modeling and simulation of a dredger drivertrain.

2011

  • Kwant Controls: Model based design suite for the design and testing of propulsion controllers. For more information see the factheet.
  • Fischcon: Simulation of a diesel-electric driven  well service pump.
  • Mecal: Implementating a model based design chain.
  • ARN: Investigating the control of a DeNOX installation.
  • Croon: Classified.
  • Industrial Development Heerenveen: Modeling and simulation an amusement park ride.
  • Penweld: Advising the research into an orbital welding machine.

2010

  • University of Twente: Modeling a walking robot. For more information see the factheet.
  • Fontijne Grotnes: Providing a tool suite for model based deisgn and HIL testing.
  • Huisman Equipment: Classified.
  • Kwant Controls: Implementing a model based design chain including code deployment.
  • KGAL: Modeling a hydraulically actuated swing bridge. For more information see the factheet.
  • SAS Gouda: For SAS offshore model based design was used to optimize the control system of a tensioner.
  • Penweld: Advising the research into an orbital welding machine.
  • Tolsma: Investigating failing temperature sensors.

2009

  • Albers: Modeling and simulation of hydraulic drives.
  • Allseas: Modeling of excess scenario's of a pipe layer.
  • Penweld: Advising the research into an orbital welding machine.
  • Industrial Development Heerenveen: Modeling and simulation an amusement park ride.
  • URENCO: Classified.

2008

  • Boskalis: Modeling a hydraulic controllable gearbox. For more information see the factheet.
  • Albers: Advise on modeling and simlation of hydraulic circuits. For more information see the factheet.
  • Stork: Engineering on a towing tank for the Depressurized Wave Basin. For more information see the factheet.
  • Trasys: implementing a variable step integration routing for generated 20-sim code.

2007

  • Stork: Re-engineering the controller of a towing tank. For more information see the factheet.
  • Nefit: Investigating a modulating pump for a water heating circuit. For more information see the factheet.
  • Stork: Re-engineering the controller of a towing tank. For more information see the factheet.
  • Océ: Modeling the heating of ink pellets. For more information see the factheet.
  • Imotec: Programming an Arloop 1500 drive. For more information see the factheet.
  • Thales: Modeling & simulation of buoy dynamics.

2006

  • Fico Singulation: Modeling and control of drive trains.
  • GP Groot: Advice on modeling of process dynamics.
  • Multin Hittech: Implementing a model baed design chain.

2005

  • DNW: Modeling a robot for the high speed windtunnel. For more information see the factheet.

2004

  • Océ: Building a virtual test bench for paper heating. For more information see the factheet.
U bevindt zich hier: Home Info Projects